Pacific Medical Free Standing Examination Table without Facehole | Black

Features

Robust
New lift and lock mechanism for easy 2-minute assembly
Lift up backrest for assessment
Face hole and non-face hole models available
Flat packed to save on freight

Specifications:

Total length: 195cm
Width: 71cm
Height: 82cm
Weight capacity: 280KG
Padding thickness: 5cm
Foam density: 36kg/m3
Upholstery: Heavy duty PVC vinyl that is fire, stain, mildew, oil, water and wear resistant

Certification: CE, FDA, ISO9001-2008, ISO13485-2007

Dust the table with a soft, dry cloth.
To clean the upholstery, apply a solution of warm water and/or a mild neutral detergent. Wipe the table dry once cleaned.
Disinfect upholstery and other surfaces with a suitable bactericide for this purpose.
Apply the disinfectant on a soft low lint cloth, never directly on the table.
Never use a mixture of disinfectants or a mixture of disinfectant and soap.
Wipe the table upholstery dry once cleaned & disinfected with a low lint cloth. This will remove any residue from the upholstery.
Avoid the accumulation of moisture on the metal frame, to avoid rusting.
Alway read the instructions and warnings for use of the disinfectant product carefully before its purchase or use.

Assembly of your new free-standing examination table is very simple and tool free.

Please follow the steps below.
● Remove all bubble wrap and ties from the table to leave the legs and the table exposed.
● Lay the table upside down with the upholstered top against the floor. Stand over the table and hold one end of the table legs and pull them slowly upward until they are vertical.
● Slowly lower the table legs into the brackets on each corner of the table.
● Line up the pin and the groove then push into place. Put extra force onto the leg bars once in position so it slots in tightly and deep into the groove.
● Repeat on the other end of the table.
● Turn the table over onto its legs and give an extra push on each end of the table once free standing to make sure it’s locked in the right place.
● For the head section insert the metal u shaped bar into the grooves on the back of the head section to the desired angle. Remove the u shaped bar from the grooves completely to lower it to a
flat position.

Freight charges and delivery method.

We want to be completely honest and transparent with you, freight is a fact of life and when it comes to furniture type items we use the most economical and trusted carriers, but it does cost money that we often can't absorb.

Larger items such as examination tables, chairs and trolleys may require freight services. If freight is applicable to your order we will contact you with a quote for the amount of freight charged to us by the freight carrier. This will always only be the same amount we are charged.

At this point we will ask if you accept the freight quote for us to ship your order. You are under no obligation to accept and if you do not wish to proceed, we will gladly refund your payment immediately.